E.F.I. Wiring Kits for VB-VL Holden fitted with Series 1, Series 2 or Ecotech Holden 3.8 Litre V6 or V8 EFI Engine and Transmission.

Customer Details

For the V6 application, you must use the changeover front crossmembers and a special right hand side engine mount. The motor and gearbox then bolts in without reworking the floor, sump, shifter or tailshaft. The ECM is mounted back in the original position (LHS kick panel) or above the glove box.

With a VK-VL Commodore you may have to send us your original engine loom as it unplugs from the firewall near the power booster and underneath the plastic fuse box on passenger side and the original fuse box (see pic below) that is mounted LHS inner fender at rear.

Our wiring loom is supplied on a changeover basis for the engine to computer loom. If no changeover is supplied an additional cost of $200 will apply.

Prices may vary if Ecotec engine is used.

Engine Bay wiring loom
(changeover engine to ECM loom required)

$480.00

Engine Bay wiring loom suit Ecotec V6 & 1994 onwards V8 engines
(changeover engine to ECM loom required)

$600.00

Reprogrammed Memcal chip to eliminate anti-theft system (VATS)
(must be done on all 1994 onwards Ecotec V6 & V8 applications)

$300.00
to $450.00

Speed Sensor Assembly with provision for speedo cable attachment - auto

$220.00

Speed Sensor Assembly with provision for speedo cable attachment - man

$200.00

Speedo Cable

$65.00

$200.00

EFI Fuel Pump Hi-Pressure

$190.00

EFI Fuel Filter

$20.00

EFI Surge Tank

$235.00

16" Thermo Fan

$210.00

Extractors to suit V6, mild steel Pt. No. CH-49

$400.00

Extractors to suit V6, mild steel with JET HOT Coating

$675.00

Extractors to suit V8 (Part No: CH58)

$450.00

Extractors to suit V8 with JET HOT Coating

$750.00

V6 engine pipe Y-piece to cat. Converter
(use with existing headers/manifolds & crossover pipes)
- not required if headers are purchased

$155.00

2 ½" Catalytic Converter

$200.00

2 ½" Turbo Muffler

$70.00

2 ½" Tail Pipe

$60.00

V6 Engine Mounts & front crossmember with modifications (changeover )

$440.00

V8 Engine Mounts

$90.00 pr

V8 - V6 Transmission Crossmember Pt. No. XM01

$110.00

Transmission Rubber Mount – manual & auto

$45.00

V8 High Torque Gear Reduction Starter Motor GR-3/1.9

$330.00

VB-VC-VH c/over gauge cluster fitted with electronic speedo
- used with VR onwards transmissions

$495.00

Matching Tacho to suit above Speedo Conversion - ADD.

Disc Brake Conversion Kit using VT Disc & Callipers.

$300.00

$call

All Prices in $Au including GST. Overseas orders will be lower. 
Back to the EFI wiring page